Drone Nerds
ABZ Innovation C10 Cleaning Drone Ready to Fly Kit
ABZ Innovation C10 Cleaning Drone Ready to Fly Kit
Couldn't load pickup availability
ABZ C10 HIGH-PRESSURE CLEANING, 60 METERS UP, CREW ON THE GROUND.
Clean high-rise facades, rooftops and complex structures from the air, with no scaffolding, cranes or rope access. The C10 brings up to 200 bar of pressure and 15 L/min of flow to heights of 60 meters, on the proven ABZ M12 airframe, with radar holding a safe standoff the whole time.
CLEAN AT HEIGHT.
SKIP THE SCAFFOLDING.
Built on the proven ABZ M12 airframe, the C10 reaches surfaces that are slow, costly or dangerous to access by hand, and gets the job done faster.
-
REACH60mFacades, rooftops and structures up to roughly 197 ft with no scaffolding, cranes or rope-access crews.
-
PRESSURE AND FLOW200barUp to 15 L/min at up to 2,900 PSI to lift dirt, algae and stubborn grime.
-
LOWER COST, LOWER RISK0at heightWorkers stay on the ground. Cuts the labor, equipment and insurance overhead of working at height.
-
RAPID DEPLOYMENTFastsetupAirborne quickly, so crews spend time cleaning, not rigging access equipment.
HIGH-FLOW WAND
MODIFICATION.
Available only through Drone Nerds, this US-market upgrade re-tunes the C10 wand for higher flow and pressure built for exterior cleaning. Only the wand is modified; every other part of the certified C10 system stays factory-standard. Switch between two modes to match the job.
-
MODE 1
HIGH-PRESSURE
High-pressure cleaning for hard surfaces and heavy buildup.
- Recommended flow rate6 GPM
- Recommended pressure3,000 PSI
- Recommended pumpGas-powered
-
MODE 2
SOFT-WASH
Soft washing and low-pressure cleaning for delicate or coated surfaces.
- Recommended flow rate14 GPM
- Recommended pressure300 PSI
- Recommended pumpGas-powered
SMART SENSING,
STABLE CONTROL.
Onboard radar and dual flight modes keep the C10 a safe, consistent distance from the surface for controlled, repeatable cleaning on demanding jobs.
-
Radar
COLLISION AVOIDANCE
Onboard radar maintains a safe, steady standoff from the surface for controlled, repeatable cleaning passes.
-
Auto
AUTOMATED MISSION MODE
For large, uniform walls the drone holds its distance and flies a pre-set cleaning loop. RTK positioning is recommended for maximum stability.
-
Manual
MANUAL FLIGHT MODE
For irregular surfaces, obstacles or windy sites, experienced pilots take full control where radar performance may be limited.
-
CE · ISO · FCC
CERTIFIED FOR THE JOB
Engineered to hold up to the demands of commercial and industrial environments.
BUILT FOR
REAL JOBSITES.
From glass towers to solar farms, the C10 is at home wherever access is difficult, dangerous or expensive. Works with a range of professional nozzles and cleaning systems to match the surface and the task.
-
HIGH-RISE AND GLASS FACADES
High-rise buildings, glass curtain walls and complex architectural structures.
CURTAIN WALLTOWERS -
INDUSTRIAL, SILOS AND TANKS
Industrial surfaces, silos and tanks that are hazardous or costly to clean by hand.
SILOSTANKS -
ROOFTOPS AND SOLAR
Rooftops and solar arrays without the foot traffic that risks damage or injury.
SOLAR ARRAYSROOFING -
HERITAGE AND HARD-TO-REACH
A controllable option for heritage buildings, monuments and surfaces where access is limited.
MONUMENTSLIMITED ACCESS
READY TO FLY KIT
OR DRONE ONLY?
Same aircraft, same wand. The kit adds the power you need to run a full shift.
| INCLUDED | C10 READY TO FLY KIT | |
|---|---|---|
| C10 drone body | Yes | |
| Battery charger | Yes | |
| Batteries | 4 included | |
| Drone Nerds high-flow wand | Yes | |
| Price | $22,209.00 |
KEY SPECIFICATIONS
Manufacturer figures. Flow and pressure at the wand depend on the pump and hose you pair with the aircraft.
- CLEANING SYSTEM
- Max working height60 m (≈197 ft)
- Max flow≈15 L/min
- Max pressure200 bar (≈2,900 PSI)
- NozzlesQuick-connect, J-Rod compatible
- Hose connectionQuick-connect coupler
- FLIGHT AND SENSING
- AirframeABZ M12
- Obstacle sensingOnboard radar
- Flight modesAutomated Mission, Manual
- PositioningRTK recommended for Mission Mode
- CertificationsCE, ISO, FCC
- DRONE NERDS WAND MODES
- High-Pressure6 GPM · 3,000 PSI
- Soft-Wash14 GPM · 300 PSI
- Recommended pumpGas-powered
- Compatible withABZ Innovation C10
- SKUABZC10-RTF
IN THE BOX
The Ready to Fly Kit. Add hose length and a prop guard below to match your sites.
- ABZ Innovation C10 drone body×1
- Drone Nerds high-flow wand (installed)×1
- Battery charger×1
- Flight batteries×4
BUILD THE KIT
AROUND IT.
What our team adds to C10 orders. Hose length is the one decision to make before the first job.
-
ABZ INNOVATION BATTERY
Fits L10, C10, S20 and M12. Four ship in the kit; spares keep the aircraft working while others charge.
-
ABZ PROP GUARD FOR THE C10
Protection for close-quarters work around facades, signage and structure.
-
ABZ C10 95 FT HOSE (30 M)
For low and mid-rise work where the pump can sit close to the structure.
-
ABZ C10 190 FT HOSE (60 M)
Full-height reach for high-rise facades and tall industrial structures.
